All Posts
Patent for Particle3D’s technology granted in China
Chinese Patent Granted for Particle3D's 3D printing technology August 10th 2021, the China National Intellectual Property Administration (CNIPA) announced that Particle3D's patent, Feedstock for 3D printing and uses thereof no. PCT/DK2016/050323, has been granted in...
read more
What 3D printing is all about
3D printing may sound like something from a galaxy far, far away, but the technology has been around for quite some time. Throughout the years, scientists from all over the world have printed everything; from small food items to large scale houses, and in the medical...
read more
Particle3D – New market-oriented Chairman of the Board
Particle3D ApSOslogade 15000 Odense C Denmark Press Release Particle3D – New market-oriented Chairman of the Board ODENSE, 1st June 2021 – Particle3D, We Print Bone™, is pleased to announce that a new and highly qualified Chairman of the...
read more
What are organoids and why are they important?
What is an organoid? Organoids cover a wide range of three-dimensional multicellular in vitro human tissue constructs that are used to mimic its corresponding in vivo organ in research [1]. The word 'organoid' is relatively new and most commonly describes constructs...
read more
Biofilm, a brief introduction
Biofilms and their medical importance Biofilms are clusters of one or more living microorganisms, or microbes, such as bacteria, fungi, and viruses that are attached to a surface and embedded in a self-produced matrix designed for the survival of organisms. And why...
read more
Particle3D initiates new cancer model research project
Optimizing P3D Scaffolds based bone tumor models ― for cancer research on metastases to bone Particle3D is happy to welcome our new research intern, Rie Andersen Lassen, who will be engaging in a new cancer model research project to optimize P3D Scaffolds-based tumor...
read more
Big step towards market approval and registration: Particle3D initiates QMS implementation
Particle3D initiates implementation of the Quality Management System for the P3D Bone implant December 11th, 2020, Particle3D’s executive management signed the first fundamental procedures of the Quality Management System which will lay the foundation for the market...
read more
New research article: Treating mouse skull defects with 3D-printed fatty acid and tricalcium phosphate implants
The performance of 3D printed bone implants in a mouse model of craniectomy The performance of P3D Bone as a novel form of individualized ceramic bone implants and controlled release drug depots has been investigated in previous studies (Jensen et al., 2018; Slots et...
read more
How miniature tumors can be grown on P3D scaffolds for cancer research
Tumoroids yield good research models for cancer research and screening of anticancer therapies In the study of cancer, tumoroids (tumor-like organoids) represent a promising tool for cost-effective research and screening of anticancer therapies. What are...
read more
Bone cancer – types, causes, and effects
Bone cancer In 2017, cancer was the second most common cause of death worldwide, while bone cancer was a major cause of morbidity and mortality. In the following, we provide an informative overview of bone cancer, its types, causes, and effects. What is cancer?...
read more
Particle3D donates research scaffolds to bone cancer researchers
In support of Danish cancer awareness week This week is Danish cancer awareness week, and we at Particle3D would like to join the Danish Cancer Society in this united, active effort against cancer. We want to take this opportunity to bring focus on bone cancer...
read more
How 3D modeling and biomaterials can transform patients’ experiences of bone replacement
Every patient is unique. Therefore, their treatment should be too Facial reconstruction presents a common challenge in surgery. Especially, when larger volumes of bone have been removed or destroyed due to tumors, infections, congenital bone defects, or trauma. For...
read more
Material choice for bone reconstruction
Biomaterials, titanium or polymers? A wide range of metal-, plastic- and biomaterials are used to repair and replace damaged bone today. However, no type of implant is currently able to meet all clinical needs, and the question of which material is most suitable for...
read more
How 3D cell culturing is revolutionizing the fields of disease modeling and regenerative medicine
What are the benefits of 3D cell culture? The development of lifelike 3D bone environments represents a good example of how 3D printing technology is revolutionizing the future of medicine, yielding advances in biotechnology and drug development. Especially, with the...
read more
Patent for Particle3D’s technology granted in the USA
U.S. Patent Granted June 9th 2020, the United States Patent and Trademark office (USPTO) announced that Particle3D's patent, Feedstock for 3D printing and uses thereof no. PCT/DK2016/050323, has been granted in the USA. This marks Particle3D's second patent issuance,...
read moreStay up to date with Particle3D on social media
Oslogade 1,
5000, Odense C
Denmark